DAMPFIX 2

ASA Dampfix 2 is an acrylic, fibre-reinforced waterproofing membrane used for waterproofing shower recesses, bathrooms, laundries, roofs and decks. ASA Dampfix 2 is part of a system, which includes ASA Multiprime and ASA Flexible Silicone.

DAMPFIX 3

ASA Dampfix 3 is a two part, cement based, acrylic modified, reinforced waterproofing membrane used for waterproofing bathrooms, laundries, roofs and deckings. ASA Dampfix 3 is part of a system, which also includes ASA Multiprime and ASA Flexible Silicone.

DAMPFIX PU

ASA Dampfix PU is a flexible, one part polyurethane membrane used for waterproofing shower recesses, bathrooms, laundries, balconies, decks, roofs and planterboxes.

DAMPSEAL

ASA Dampseal is a black, one part, coal tar free, moisture curing, polyurethane waterproofing membrane. After curing, it provides a tough, highly elastomeric barrier impervious to moisture.

DAMPFIX REPAIR KIT

Specifically used for waterproofing shower recesses, bathrooms and laundries prior to the application of tiles. The repair kit includes,4 litres Dampfix 2 fibre re-inforced waterproofing membrane, 1litre ASA Multiprime and 300ml of ASA Flexible Silicone.

DAMPFIX MOISTURESEAL

ASA Dampfix Moisture Seal is a 2-part water based epoxy, which chemically cures to form a tough waterproof barrier. Should be used as a primer over damp concrete and damp screeds prior to the application of ASA waterproofing membranes to ensure a complete dry without bubbling.

Part A

Part B

DAMPFIX SEAL ‘N’ FILLET

ASA Dampfix Seal ‘n’ Fillet is a white, low modulus, polyurethane sealant that cures from moisture in the air to form a soft elastic weatherproof seal.

DAMPFIX LEAKFIX

ASA Dampfix Leakfix is a thin liquid designed to penetrate into the grout and sand/cement base of leaking shower recesses and balconies. ASA Dampfix Leakfix is absorbed into the pores of the grout creating a hydrophobic plug preventing water penetrating through the grout. Repairs leaking shower recesses without the removal of tiles.

TORCH - ON WATERPROOF MEMBRANE

A blend of distilled bitumen modified with elastoplastomeric polymers, atactic polypropylene and selected stabilising fillers. Ideal for roof top applications.

Backing Rod is a closed cell, low density polyethylene foam, designed for use as a backing material in construction joints before the application of sealants.